Excellent product, looks like it was made for the Stribog. Also, super fast shipping! Will definitely come back next time I'm in the market for a flash can.
Looks good and It fits good on the M4E1 atlas s one upper witch is very slim, although it is a tad off center as it slightly scrapes the handgaurd per revaluation or I would give it 5 stars
Was exactly what I was looking for to extend the muzzle out when not using suppressor. Prevents fingers from slipping forward off the afg in front of muzzle.
Exactly what I was looking for. It’s perfect if you want the flush look and your barrel extends past your hand guard. Awesome design and well made!!
Purchased a blemished can for my 8.5 inch build chambered in 556 . Arrived in a timely matter really couldn’t find the blem . Used it with a 10 inch hand guard completed my build perfectly this is my second purchase. Awesome addition to any AR pistol
High quality finish, three minute installation, perfect fit and the exact look I was hoping to achieve with my AR pistol. Great addition to a build at an excellent price point!
Bought the matte black mini for my AR build and it gives it the look I wanted. It also does what it is intended to do and directs the flash away from the shooter. I have purchased similar products but the Black Moose 50/50 is the best hands down. You just got a lifelong customer.
The fit is awesome on my builds. Looks and performs very well. Freat way to finish off the look and performance.
This one is for my 5.56 pistol build and again perfect fit function test tomorrow...
Looks great on my 9mm pistol build... can’t wait to get it on range for full review.
Fits great on my Foxtrot Mike’s 10.5” 9mm upper! Very straight forward (pun intended) and great service from Black Moose. Thank y’all!
Extremely lightweight, great craftsmanship. Fits like a glove. Looks great with my Core15 piston build. Liked it so much I bought a second one
Quality perfect exactly what I hoped it would be. Shipping was quick. Price was great. I will buy from these guys again.
Awesome product! Just what I was looking for, fills the gap between handguard and muzzle, gives a nice, finished appearance.
Thanks again guys this product works very nice. I purchased three of them so far and will be ordering more for some other project builds. I have one on my 300 blackout pistol, Ar9mm spikes tactical pistol and one on my Ar9mm micro build. Fast shipping A+ and a great price point. Its Light weight and a nice finish and not only that it looks good it works. This is exactly what I've been looking for. Thank you
Awesome can... keeps sound down range!!
Bought this back in may of 2018 and was impressed. Will be buying more for future builds.
Haven't shot it yet but looks great. Easy install.
Sweet XL can for my extar 9mm AR pistol. Slips over the barrel for suppressed look. Love it!
I saw this and immediately thought it was a great idea! I changed out my front A2 sight for an adjustable gas block and the Black Moose 50/50 can is the perfect thing to cover the notch in my barrel from the taper pin of the A2 on my 10.5 barreled pistol. It covers the barrel notch and takes up the otherwise ugly space left in front of the gas block on my Magpul MOE fore-end equipped AR pistol. I will definitely recommend the 50/50 can and will buy more for future builds. Price point is good considering the quality of the can and the matte Anodizing. It really completes my build!
I love it. I was hesitant to build a pistol because they're so damn loud. I rolled the dice because of this product and won.
Great fit, clean look. Taking it out for a test tomorrow! Just looking at it and the feel of it I've already recommended it to friends!
Bought the smaller of the two cans for a Diamondback 10.5" pistol. The pistol has a carbine length system. The barrel doesn't thread through the can's entire thread. Although the can does stay on. I plan on shaving down the can on one side so it will entirely thread. Great product even though.
It's pure genius. I haven't taken it out yet, quality seems good, fits as stated, simple install and looks great on my 7.5". You can install either end depending on your gas system to get look you want with the rail. Arrived quickly and in good shape. Would like to have the option of purchase in raw but overall great product. Thx BM
The can works well as stated. Looks great on my 300 build.
Although I painted mine to match my 458 socom I built,fit and functionality was perfect. What suprised me was how well it worked sending sound down range. Plenty of shots and no ear ringing,will definitely use again.
It truly is the best at what it does it fills the spot between the hand guards and barrel but with elegance and the bonus of the 50/50 can is its sound forwarding people in the indoor ranges will love you Great product Rich a really awesome job so awesome I just purchased a 50/50 xl because I use them as my go to muzzle device you made this infantryman /warrior /father /brother very happy indeed.
This is a unique product it closes the gap between the handguard and the barrel that would have been a gap with a regular flash can on my pistol. Only product on the market that does this . Came as described and is perfect. Fast delivery and would recommend all day long.
I haven’t shot the pistol yet but did a mock up to see how it looks on a 8.5” barrel with 7” free float. Looks really sexy if I say so myself. Few nicks and scratches when I received it but will not affect function. Will definitely order some more in the future.
I absolutely love this can. I thought I wouldn’t like the raw aluminum look. BUT I LOVE IT! Thank you so much
nice add on to my CZ Scorpion
This is awesome!!!!
Purchased the can to go on my 10.5 inch AR Chambered in 7.62x39 1) arrived a day early 2) I ordered the raw material because the black was out of stock didn’t think I was going to like it but wrong it’s really nice 3) installation was a breeze 4) I highly recommend will be purchasing again for my 7.5 build
The Black Moose 50/50 can is sleek and clean and is a perfect blast can. It ended up right at the edge of my rail too!
frickin awesome as fcuk!!
Loved the 50/50 can. Gave my rifle a unique sound of it’s own. PS. The flat black looks awesome!
Love the fit especially on such a low profile thin rail! I ordered 2 more, just wish I could get one for my .50 Beowulf but they don't come in the right thred pitch or size.
I did not expect much for the price it. However I started smiling the moment I fitted it to my weapon. Now I want one for my 9mm build! Hope you got my picture!
Works great and gives it an awesome look definitely will be buying more . Also top notch customer service and fast shipping.
50/50 can fit perfectly,,no more gap!!
I spent hours looking for the perfect fitment to my rifle build. I came across Blackmoose on accident and its the best thing that ever happened for my build. This 50/50 Can fit the bill perfectly for what I had envisioned for my rifle. I couldn't be more satisfied with the quality of the Can and the way it came out once it was installed. Installment equipment also on point. So expect noting less then quality if you decide to take the plunge. Quick shipment too, once it was back in stock from the backorder. I sadly haven't shot my rifle with this can yet but I fully expect nothing but a fun time at the range. I had a PSA Fluted Flash Can previously and feel it will have a similar shooting experience. Thank you Blackmoose for this fine piece of equipment.
MATTE FINISH (matte black)
I installed this on a dedicated 22lr upper that was built with the smaller diameter lightweight handgaurds . There was about 2" between where the handgaurd stopped and the original A2 flash hider started. The 50/50 can matched up great in color and smoothed out the look and fixed the handgaurd/muzzle device gap. I can see this working well with shorter pistol style uppers also.
Shoots great keeps heat away from hand ,and directs flash foward, and looks alot better than an A2 flash hider ,only con i have is i wish it was matte black so it whould match the pistol.
Fits great, really sets off the look of the rifle. Thanks
Installed on my CZ Scorpion with zero problems, exactly the look I was going for. My only suggestion would be a matte finish that said its still perfect Thanks Black Moose
Installed on my 12.5” barrel 6.5 Grendel. Looks great and is functional as well.
Rich, I just received mine in the mail and can't wait to get it to the range. Thank you for the fast delivery. The inner diameter of my rail was about 1.264 to 1.294 so I was worried that it wouldn't fit but it looks perfectly awesome. Your product was exactly what I had been looking for. All the other ones in the market I have seen do not cover the barrel past the thread and yours does. I love it. Thanks again.
Amazing product. Completes my rifle with a "flash can" look amd doesnt break the bank. I hihly recommend this product if youre looking to bridge the gap between freefloat rail and muzzle device
nice and does a good job on my rifle
Perfect product to finish my Stribog build. I used the included lock washer sandwiched between two AR crush washers to get a tight and near flush to forend look. Thanks.
The shipping was fast. The price was awesome! It chose the blemished option but honestly, I really don't see any blemishes. I chose this for clean, uniform look for my .300 blackout AR pistol. A simple, clean, functional blast can is what I was after and Black Moose delivered!!
What can i say? I'll keep it simple, exactly what i was looking for, affordably priced, a quality product, easy ordering, shipped and arrived fast, installed easily, and looks awesome. I have yet to to see how it functions but i can only expect that it will function as expected. Thanks again,
Great customer service!
great fit and finish at a 'more than fair price'. can't install until July but will try to send a photo then on a AR .458 SOCOM build.....thanks so much !!
Robert jr W.
Great product! this is the third can I've purchased. Jimmy John's has nothing on the staff at blackmoose, freaking fast delivery. Thank you
This is my second time around! After the first one the was no mistake made! Liked the idea love the product! I wish you had that buy one get 50% offer. Alas there goes my money. But I’m too pleased to fuss!
Makes my Stribog look awesome!
Not a bad addition to a 300blk waiting for a can. It fills out a quad rail nicely, and there is plenty of barrel space to spare between it and the gas block on an 8.5” barrel with a pistol length gas system. I plan to give it a little duracoat paint job as well to go with the FDE theme on the “pistol.” My only gripe is that there was a ding/blemish on it on the bezel of the tube on the inward side. Hardly noticeable but I know it’s there...
This was my second Black Moose 50/50 can purchase. The first was for my 10.5" DB "pistol". I spent a lot of time searching for something that would function as a flash can and still fill the gap between the muzzle device the rail. Black Moose provided exactly what I needed. When I recently purchased a 10.5", 7.62X39, KS-47 I knew my first addition would be another 50/50 can. Both fit and function as designed and look great on the guns. My thanks to Black Moose, for providing a unique and well made product that fill an actual need.
The 50/50 flash can is a simple and heavy duty product. when i first saw it i thought to my self wtf. but the more i studied it the more sense it made. the photos in the ad made it very clear how it works. you guys did a good job with this and make a damn fine product. i have one on a 7.62x39 upper and another on a 10.5 inch .223 upper. I could not be happier. sincerely Mike Sullivan.
hav2 now plan on ordering 3 more,hate most muzzle breaks they are loud & most don't reduce recoil enough to be worth the cost in $ or hearing this product directs all sound down range just like it should & look super on any AR
Looks great and the Sound Reduction is awesome.
It is a great can. Never thought I'd like a can not a comp but it works just as good as a comp. I got the gray color and it looks great and I would highly recommend it !!!! Great product and great service !!!!
Right out the box great product. Fit and presentation was on point. Will definitely be a repeat customer for future Ar Builds.
Great product, great customer service! I would highly recommend the product and the "MOOSE"
There's no need to include the lock washer; unfortunately, I used the lock washer and it bit into my Tacsol barrel and deeply into the shroud - my bad, shouldn't have used it. Otherwise, the shroud is totally functional.
Looks great, fits great.
Great and fast service.
Very nice product definitely feels a need for the price you can't beating it would recommend.
By design there is no way it will not do what it’s supposed to. This thing looks awesome on my 7.5 pistol. I love it, and easy to install. One thing I did do was use a mil-spec crush washer, mine came with a conventional lock washer which did mar the internal surface of the aluminum. If you’re on the fence about this, I recommend you get it! I’m very pleased.
Love the product perfect dimensions, threads were smooth. Recommend adding so dimples or grooves that will help with grip for tightening and improve on looks